Double door and single door hot air circulation oven supplier

Hot air circulation oven manufacturerPurpose and Introduction

This machine is suitable for sterilization and drying of various materials, rubber stoppers, aluminum caps, and antibiotic bottles. It is heated by a stainless steel electric heating rod (or steam heating), with a direct cooling fan for hot air circulation. The heating is fast and the sterilization efficiency is high. It can automatically display, control, and record the temperature, and can alarm in a timely manner if it exceeds the temperature limit.

Hot air circulation oven manufacturerMain technical parameters

Production capacity: According to user requirements
Temperature regulation range: 50 ℃~350 ℃ (or 50 ℃~140 ℃)
Timing range: 0-24 hours
Power supply: 380V 50Hz three-phase four wire system
Power: ≤ 18Kw (or 2kw)
Dimensions: Customized according to capacity

Notes:
Before use, it is necessary to pay attention to whether the voltage of the power supply used can meet the requirements. When using, the grounding wire of the power socket must be grounded according to the rules.
2. When powered on, avoid touching the electrical parts on the left side of the box with your hands or wiping with a damp cloth or rinsing with water. During inspection, the power should be cut off.
3. The power cord should not be wrapped around metal objects or placed in a low temperature or humid center to avoid rubber aging and electrical leakage.
4. Do not squeeze the items inside the box too tightly. It is necessary to leave space for natural convection of the atmosphere, so that the humid atmosphere can slow down and escape on the top of the wind.
5. It is necessary to regularly reflect on whether the silver contacts of the temperature regulator are hairy or uneven. If so, the contacts can be sanded flat with fine yarn cloth before use, and should be wiped clean with a clean cloth to ensure good contact (note that the power must be cut off). Do not collide the metal pipes of the indoor temperature regulator to avoid affecting its flexibility.
6. Do not put flammable materials in dry boxes without explosion-proof installation.
7. After each use, the power supply should be partially cut off and the inside and outside of the box should be kept clean. Hang corresponding labels after cleaning.